Nanoscale mapping of residual stresses in Al 2024 alloys using correlative and multimodal scanning transmission electron microscopy.

A methodology for the mapping of residual stresses in metal alloys has been developed by analyzing an isotropic and homogeneous Al2024 alloy with scanning transmission electron microscopy (STEM), combined with diffraction (4DSTEM) and electron energy loss spectroscopy (STEM-EELS) techniques of TEM. The investigations on the alloy's microstructure and elemental distributions were also carried out with conventional dark-field STEM (DFSTEM) and X-ray energy dispersive (EDS) techniques, respectively. Using the STEM-EELS technique, the Young's modulus (YM) is mapped in the (001) plane of the Al alloy in the same regions where the residual strain maps are generated in [1‾ 00] and [010] directions by using 4DSTEM technique. The YM vs. residual strain plot for the Al 2024 alloy revealed that the value of YM decreased by about ∼ 7 % after the tensile residual strain reached 0.02 %. Whereas such a decrease in YM happens after the compressively residual strain reaches -0.015 %. The residual stress maps were also obtained in accordance with the Hooke's law i.e., by multiplying YM map with the corresponding residual strain maps.

Major Role of Multiscale Entropy Evolution in Complex Systems and Data Science.

Complex systems are prevalent in various disciplines encompassing the natural and social sciences, such as physics, biology, economics, and sociology. Leveraging data science techniques, particularly those rooted in artificial intelligence and machine learning, offers a promising avenue for comprehending the intricacies of complex systems without necessitating detailed knowledge of underlying dynamics. In this paper, we demonstrate that multiscale entropy (MSE) is pivotal in describing the steady state of complex systems. Introducing the multiscale entropy dynamics (MED) methodology, we provide a framework for dissecting system dynamics and uncovering the driving forces behind their evolution. Our investigation reveals that the MED methodology facilitates the expression of complex system dynamics through a Generalized Nonlinear Schrödinger Equation (GNSE) that thus demonstrates its potential applicability across diverse complex systems. By elucidating the entropic underpinnings of complexity, our study paves the way for a deeper understanding of dynamic phenomena. It offers insights into the behavior of complex systems across various domains.

Evolution of Oxygen Vacancy Sites in Ceria-Based High-Entropy Oxides and Their Role in N2 Activation.

In this work, a relatively new class of materials, rare earth (RE) based high entropy oxides (HEO) are discussed in terms of the evolution of the oxygen vacant sites (Ov) content in their structure as the composition changes from binary to HEO using both experimental and computational tools; the composition of HEO under focus is the CeLaPrSmGdO due to the importance of ceria-related (fluorite) materials to catalysis. To unveil key features of quinary HEO structure, ceria-based binary CePrO and CeLaO compositions as well as SiO2, the latter as representative nonreducible oxide, were used and compared as supports for Ru (6 wt % loading). The role of the Ov in the HEO is highlighted for the ammonia production with particular emphasis on the N2 dissociation step (N2(ads) → Nads) over a HEO; the latter step is considered the rate controlling one in the ammonia production. Density functional theory (DFT) calculations and 18O2 transient isotopic experiments were used to probe the energy of formation, the population, and the easiness of formation for the Ov at 650 and 800 °C, whereas Synchrotron EXAFS, Raman, EPR, and XPS probed the Ce-O chemical environment at different length scales. In particular, it was found that the particular HEO composition eases the Ov formation in bulk, in medium (Raman), and in short (localized) order (EPR); more Ov population was found on the surface of the HEO compared to the binary reference oxide (CePrO). Additionally, HEO gives rise to smaller and less sharp faceted Ru particles, yet in stronger interaction with the HEO support and abundance of Ru-O-Ce entities (Raman and XPS). Ammonia production reaction at 400 °C and in the 10-50 bar range was performed over Ru/HEO, Ru/CePrO, Ru/CeLaO, and Ru/SiO2 catalysts; the Ru/HEO had superior performance at 10 bar compared to the rest of catalysts. The best performing Ru/HEO catalyst was activated under different temperatures (650 vs 800 °C) so to adjust the Ov population with the lower temperature maintaining better performance for the catalyst. DFT calculations showed that the HEO active site for N adsorption involves the Ov site adjacent to the adsorption event.

In Situ Growth of Interfacially Nanoengineered 2D-2D WS2/Ti3C2Tx MXene for the Enhanced Performance of Hydrogen Evolution Reactions.

In line with current research goals involving water splitting for hydrogen production, this work aims to develop a noble-metal-free electrocatalyst for a superior hydrogen evolution reaction (HER). A single-step interfacial activation of Ti3C2Tx MXene layers was employed by uniformly growing embedded WS2 two-dimensional (2D) nanopetal-like sheets through a facile solvothermal method. We exploited the interactions between WS2 nanopetals and Ti3C2Tx nanolayers to enhance HER performance. A much safer method was adopted to synthesize the base material, Ti3C2Tx MXene, by etching its MAX phase through mild in situ HF formation. Consequently, WS2 nanopetals were grown between the MXene layers and on edges in a one-step solvothermal method, resulting in a 2D-2D nanocomposite with enhanced interactions between WS2 and Ti3C2Tx MXene. The resulting 2D-2D nanocomposite was thoroughly characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman, Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) analyses before being utilized as working electrodes for HER application. Among various loadings of WS2 into MXene, the 5% WS2-Ti3C2Tx MXene sample exhibited the best activity toward HER, with a low overpotential value of 66.0 mV at a current density of -10 mA cm-2 in a 1 M KOH electrolyte and a remarkable Tafel slope of 46.7 mV·dec-1. The intercalation of 2D WS2 nanopetals enhances active sites for hydrogen adsorption, promotes charge transfer, and helps attain an electrochemical stability of 50 h, boosting HER reduction potential. Furthermore, theoretical calculations confirmed that 2D-2D interactions between 1T/2H-WS2 and Ti3C2Tx MXene realign the active centers for HER, thereby reducing the overpotential barrier.

Gold nanoparticles spectral CT imaging and limit of detectability in a new materials contrast-detail phantom.

This study involves the synthesis, characterization, and spectral photon counting CT (SPCCT) imaging of gold nanoparticles tailored for enhancing the contrast of small cancer lesions. We used the modified Turkevich method to produce thiol-capped gold nanoparticles (AuNPs) at different concentrations (20, 15, 10, 5, 2.5, 1.25, 0.6 mg/ml). We thoroughly characterized the AuNPs using Transmission Electron Microscopy (TEM), X-ray diffraction spectroscopy (XRD), Dynamic Light Scattering (DLS), and UV-visible absorption spectroscopy. To assess the AuNPs contrast enhancing performance, we designed and built a new material contrast detail phantom for CT imaging and determined the minimum detectable concentrations of AuNPs in simulated lesions of small diameters (1, 2, 3, and 5 mm). The synthesized AuNPs are spherical with an average size of approximately 20 ± 4 nm, with maximum UV absorption occurring at 527 nm wavelength, and exhibit a face-centered cubic structure of gold according to XRD analysis. The synthesized gold nanoparticles demonstrated high contrast in SPCCT, suggesting their potential as contrast agents for imaging cancer tissues. The AuNPs image contrast was directly proportional to the AuNPs concentration. We are the first to determine that the lowest visually distinguishable contrast was achieved at a gold concentration of 5 mg/ml for a 2 mm simulated lesion. For 1 mm size lesion the smallest visible concentration was 10 mg/ml. This newly developed phantom can be used for determining the minimal concentration required for various high-Z nanoparticles to produce detectable contrast in X-ray imaging for small-size simulated lesions.

Synthesis, characterization, and preliminary insights of ZnFe2O4 nanoparticles into potential applications, with a focus on gas sensing.

This work presents a hydrothermal-based facile method for synthesizing ZnFe2O4, whose size can be controlled with the concentration of sodium acetate used as a fuel and its physical changes at nanoscales when exposed to two different gases. The structural, morphological, compositional, and electronic properties of the synthesized samples are also presented in this paper. The crystal structure of the synthesized samples was determined using an X-ray Diffractometer (XRD). The results revealed fluctuations in the size, lattice parameter, and strain in the nanoparticles with increasing the concentration of sodium acetate. Field-Emission Scanning Electron Microscopy (FESEM) was used to determine synthesized materials' morphology and particle size. It revealed that the particles possessed approximately spherical morphology whose size decreased significantly with the increasing amount of sodium acetate. Transmission Electron Microscopy (TEM) was utilized to determine the structure, morphology, and elemental distributions in particles at the nanoscale, and it confirmed the findings of XRD and FESEM analyses. The high-resolution TEM (HRTEM) imaging analysis of the nanoparticles in our studied samples revealed that the particles predominantly possessed (001) type facets. X-ray photoelectron spectroscopy (XPS) and core-loss electron energy loss spectroscopy (EELS) showed an increasing fraction of Fe2+ with the decreasing size of the particles in samples. The Brunauer, Emmett, and Tellers (BET) analysis of samples revealed a higher surface area as the particle size decreases. In addition, the determined surface area and pore size values are compared with the literature, and it was found that the synthesized materials are promising for gas-sensing applications. The ab initio calculations of the Density of States (DOS) and Band structure of (001) surface terminating ZnFe2O4 were carried out using Quantum Espresso software to determine the bandgap of the synthesized samples. They were compared to their corresponding experimentally determined bandgap values and showed close agreement. Finally, in-situ TEM measurement was carried out on one of the four studied samples with robust properties using Ar and CO2 as reference and target gases, respectively. It is concluded from the presented study that the size reduction of the ZnFe2O4 nanoparticles (NPs) tunes the bandgap and provides more active sites due to a higher concentration of oxygen vacancies. The in-situ TEM showed us a nanoscale observation of the change in one of the crystal structure parameters. The d spacing of ZnFe2O4 NPs showed a noticeable fluctuation, reaching more than 5% upon exposure to CO2 and Ar gases.

Synthesis of Mesoporous Carbon Adsorbents Using Biowaste Crude Glycerol as a Carbon Source via a Hard Template Method for Efficient CO2 Capture.

Biowaste utilization as a carbon source and its transformation into porous carbons have been of great interest to promote environmental remediation owing to biowaste's cost-effectiveness and useful physicochemical properties. In this work, crude glycerol (CG) residue from waste cooking oil transesterification was employed to fabricate mesoporous crude glycerol-based porous carbons (mCGPCs) using mesoporous silica (KIT-6) as a template. The obtained mCGPCs were characterized and compared to commercial activated carbon (AC) and CMK-8, a carbon material prepared using sucrose. The study aimed to evaluate the potential of mCGPC as a CO2 adsorbent and demonstrated its superior adsorption capacity compared to AC and comparable to CMK-8. The X-ray diffraction (XRD) and Raman results clearly depicted the structure of carbon nature with (002) and (100) planes and defect (D) and graphitic (G) bands, respectively. The specific surface area, pore volume, and pore diameter values confirmed the mesoporosity of mCGPC materials. The transmission electron microscopy (TEM) images also clearly revealed the porous nature with the ordered mesopore structure. The mCGPCs, CMK-8, and AC materials were used as CO2 adsorbents under optimized conditions. The mCGPC adsorption capacity (1.045 mmol/g) is superior to that of AC (0.689 mmol/g) and still comparable to that of CMK-8 (1.8 mmol/g). The thermodynamic analyses of the adsorption phenomena are also carried out. This work demonstrates the successful synthesis of a mesoporous carbon material using a biowaste (CG) and its application as a CO2 adsorbent.

Synthesis of Graphene Oxide from Sugarcane Dry Leaves by Two-Stage Pyrolysis.

Natural or synthetic graphite as precursors for the preparation of graphene oxide (GO) have constraints due to their limited availability, high reaction temperature for processing of synthetic graphite and higher generation cost. The use of oxidants, long reaction duration, the generation of toxic gases and residues of inorganic salts, the degree of hazard and low yield are some of the disadvantages of the oxidative-exfoliation methods. Under these circumstances, biomass waste usage as a precursor is a viable alternative. The conversion of biomass into GO by the pyrolysis method is ecofriendly with diverse applications, which partially overcomes the waste disposal problem encountered by the existing methods. In this study, graphene oxide (GO) is prepared from dry leaves of sugarcane plant through a two-step pyrolysis method using ferric (III) citrate as a catalyst, followed by treatment with conc. H2SO4. The synthesized GO is analyzed by UV-Vis., FTIR, XRD, SEM, TEM, EDS and Raman spectroscopy. The synthesized GO has many oxygen-containing functional groups (-OH, C-OH, COOH, C-O). It shows a sheet-like structure with a crystalline size of 10.08 nm. The GO has a graphitic structure due to the Raman shift of G (1339 cm-1) and D (1591 cm-1) bands. The prepared GO has multilayers due to the ratio of 0.92 between ID and IG. The weight ratios between carbon and oxygen are examined by SEM-EDS and TEM-EDS and found to be 3.35 and 38.11. This study reveals that the conversion of sugarcane dry leaves into the high-value-added material GO becomes realistic and feasible and thus reduces the production cost of GO.

Enhanced Graphene Oxide Electrical Properties for Thin-Film Electronics Using an Active/Shrinkable Substrate.

The advances in material science along with the development of fabrication techniques have enabled the realization of thin-film-based electronics on active substrates. This has substantially enhanced and supported the deployment of electronic devices in several emerging applications with flexible functionality. In this work, we report a novel fabrication of graphene oxide (GO)-based memristor devices on an active/shrinkable substrate. The standard lithography process is used to fabricate planar Au-rGO-Au devices on a polymer substrate that has the ability to shrink at a certain temperature (i.e., 170 °C). Upon heating, the devices are shrunk to 50% of their original size. A detailed electrical characterization has been carried out to study the switching behavior of the fabricated devices before and after shrinking. The results prove that upon shrinking, the device preserves its switching ability with enhanced electrical parameters (i.e., switching voltage). Also, material characterization performed for the deposited GO on the active substrate shows improved properties of the GO film due to the enhanced arrangement of GO flakes after shrinking. The novel approach proposed in this work provides new insights into and offers the ability to scale thin-film electronics postfabrication and thus overcome some of the device scaling challenges due to manufacturing limitations. It also unfolds a new path for the realization of GO-based electronic devices with improved electrical properties, which is a crucial aspect of the development of highly flexible and lightweight green electronics.

From multi-segmented to core/shell nanorods: morphology evolution in Fe-Au nanorods by tuning fabrication conditions.

Aiming to obtain hybrid magneto-plasmonic nanostructures, we have developed multisegmented and core/shell structured Fe-Au nanorods using template assisted electrochemical deposition. A facile method of tuning the growth pattern of multisegmented nanorods into core/shell structured is demonstrated. With a precise control of current density and deposition time, a brick-stacked wire like growth led to the formation of hollow nanotubes that could be further tuned to multilayered hollow nanotubes and core/shell structured nanorods. TEM imaging and STEM-EELS technique were used to explore the morphology, microstructure and the distribution of Au and Fe in the nanorods. The easy magnetization direction was found to be perpendicular to the nanorods' growth direction in the segmented nanorods. On the other hand, core/shell nanorods exhibited isotropic behavior. Our findings provide deeper insights into the fabrication of hybrid nanorods and the opportunity to tune the fabrication method to vary their morphology accordingly. Such studies will benefit design of hybrid nanorods with specific morphologies and physical properties and hence their integration into sensing, spintronics and other potential biomedical and technological applications.

Carbon dioxide adsorbents from flame-made diesel soot nanoparticles.

Carbon dioxide (CO2) is the top contributor to global warming. On the other, soot particles formed during fuel combustion and released into the atmosphere are harmful and also contribute to global warming. It would therefore be highly advantageous to capture soot and make use of it as a feedstock to synthesize carbon-based materials for applications such as carbon dioxide adsorption. In this work, flame-made diesel soot nanoparticles were used to produce a variety of activated carbons by combined oxidative treatment with hydrogen peroxide (H2O2) and potassium hydroxide (KOH), and their performance towards CO2 adsorption was evaluated. The effect of the chemical activation of soot with H2O2 for different reaction times and with KOH on the physicochemical properties of the activated carbons was investigated and compared to fresh soot. Interestingly, hollow aggregates of carbonaceous nanoparticles of a high interplanar distance, reduced polycyclic aromatic hydrocarbons (PAH) size, shorter PAH stacks, mesoporous structure, and a high content of oxygen functionalities along with other structural defects in PAHs were obtained in the synthesized activated carbons. Among the various analysis techniques employed, Raman spectroscopy indicated that the ID/IG ratio in soot decreased after simultaneous chemical treatment, though it did not indicate any enhancement in the graphitic character since the carbonyl and carboxylic containing PAHs and monovacancies (which cause defects in PAHs) also contribute to the increase in the intensity of the graphitic band. The activated carbons possessed promising CO2 adsorption capacities, adsorption kinetics and CO2/N2 selectivity. For example, one of the activated carbons, following H2O2 treatment for 9 h and a subsequent KOH activation, exhibited a CO2 adsorption capacity of 1.78 mmol/g at 1 bar and 25 °C, representing an increase of 161 % in capacity as compared to fresh soot. Hollow aggregates of carbonaceous nanoparticles consisting of shorter PAHs with a larger number of defects led to enhanced CO2 adsorption rate and CO2/N2 selectivity on activated carbons.

Cryo-electron structures of the extreme thermostable enzymes Sulfur Oxygenase Reductase and Lumazine Synthase.

Thermostable enzymes have the potential for use in a wide variety of biotechnological applications. Cryo-electron microscopy (cryo-EM) enables the imaging of biomolecules in their native aqueous environment. Here, we present high resolution cryo-EM structures of two thermostable enzymes that exhibit multimeric cage-like structures arranged into two different point-group symmetries. First, we determined the structure of the Sulfur Oxygenase Reductase (SOR) enzyme that catalyzes both the oxygenation and disproportionation of elemental sulfur in Archea and is composed of 24 homomeric units each of MW ≃ 35 kDa arranged in octahedral symmetry. The structure of SOR from Acidianus ambivalens (7X9W) was determined at 2.78 Å resolution. The active site of each subunit inside the central nanocompartment is composed of Fe3+ coordinated to two water molecules and the three amino acids (H86, H90 and E114). Second, we determined the structure of Lumazine Synthase (LS) from Aquifex aeolicus (7X7M) at 2.33 Å resolution. LS forms a cage-like structure consisting of 60 identical subunits each of MW ≃ 15 kDa arranged in a strict icosahedral symmetry. The LS subunits are interconnected by ion-pair network. Due to their thermostability and relatively easy purification scheme, both SOR and LS can serve as a model for the catalytic and structural characterization of biocatalysts as well as a benchmark for cryo-EM sample preparation, optimization of the acquisition parameters and 3D reconstruction.

Carbon Nanostructure/Zeolite Y Composites as Supports for Monometallic and Bimetallic Hydrocracking Catalysts.

In this study, we examine the effect of integrating different carbon nanostructures (carbon nanotubes, CNTs, graphene nanoplatelets, GNPs) into Ni- and Ni-W-based bi-functional catalysts for hydrocracking of heptane performed at 400 °C. The effect of varying the SiO2/Al2O3 ratio of the zeolite Y support (between 5 and 30) on the heptane conversion is also studied. The results show that the activity, in terms of heptane conversion, followed the order CNT/Ni-ZY5 (92%) > GNP/Ni-ZY5 (89%) > CNT/Ni-W-ZY30 (86%) > GNP/Ni-W-ZY30 (85%) > CNT/Ni-ZY30 (84%) > GNP/Ni-ZY30 (83%). Thus, the CNT-based catalysts exhibited slightly higher heptane conversion as compared to the GNP-based ones. Furthermore, bimetallic (Ni-W) catalysts possessed higher BET surface areas (725 m2/g for CNT/Ni-W-ZY30 and 612 m2/g for CNT/Ni-ZY30) and exhibited enhanced hydrocracking activity as compared to the monometallic (Ni) catalyst with the same zeolite support and type of carbon structure. It was also shown that CNT-based catalysts possessed higher regeneration capability than their GNP-based counterparts due to the slightly higher thermal stability of the CVD-grown CNTs.

Decoupling the Chemical and Mechanical Strain Effect on Steering the CO2 Activation over CeO2-Based Oxides: An Experimental and DFT Approach.

Doped ceria-based metal oxides are widely used as supports and stand-alone catalysts in reactions where CO2 is involved. Thus, it is important to understand how to tailor their CO2 adsorption behavior. In this work, steering the CO2 activation behavior of Ce-La-Cu-O ternary oxide surfaces through the combined effect of chemical and mechanical strain was thoroughly examined using both experimental and ab initio modeling approaches. Doping with aliovalent metal cations (La3+ or La3+/Cu2+) and post-synthetic ball milling were considered as the origin of the chemical and mechanical strain of CeO2, respectively. Experimentally, microwave-assisted reflux-prepared Ce-La-Cu-O ternary oxides were imposed into mechanical forces to tune the structure, redox ability, defects, and CO2 surface adsorption properties; the latter were used as key descriptors. The purpose was to decouple the combined effect of the chemical strain (εC) and mechanical strain (εM) on the modification of the Ce-La-Cu-O surface reactivity toward CO2 activation. During the ab initio calculations, the stability (energy of formation, EOvf) of different configurations of oxygen vacant sites (Ov) was assessed under biaxial tensile strain (ε > 0) and compressive strain (ε < 0), whereas the CO2-philicity of the surface was assessed at different levels of the imposed mechanical strain. The EOvf values were found to decrease with increasing tensile strain. The Ce-La-Cu-O(111) surface exhibited the lowest EOvf values for the single subsurface sites, implying that Ov may occur spontaneously upon Cu addition. The mobility of the surface and bulk oxygen anions in the lattice contributing to the Ov population was measured using 16O/18O transient isothermal isotopic exchange experiments; the maximum in the dynamic rate of 16O18O formation, Rmax(16O18O), was 13.1 and 8.5 µmol g-1 s-1 for pristine (chemically strained) and dry ball-milled (chemically and mechanically strained) oxides, respectively. The CO2 activation pathway (redox vs associative) was experimentally probed using in situ diffuse reflectance infrared Fourier transform spectroscopy. It was demonstrated that the mechanical strain increased up to 6 times the CO2 adsorption sites, though reducing their thermal stability. This result supports the mechanical actuation of the "carbonate"-bound species; the latter was in agreement with the density functional theory (DFT)-calculated C-O bond lengths and O-C-O angles. Ab initio studies shed light on the CO2 adsorption energy (Eads), suggesting a covalent bonding which is enhanced in the presence of doping and under tensile strain. Bader charge analysis probed the adsorbate/surface charge distribution and illustrated that CO2 interacts with the dual sites (acidic and basic ones) on the surface, leading to the formation of bidentate carbonate species. Density of states (DOS) studies revealed a significant Eg drop in the presence of double Ov and compressive strain, a finding with design implications in covalent type of interactions. To bridge this study with industrially important catalytic applications, Ni-supported catalysts were prepared using pristine and ball-milled oxides and evaluated for the dry reforming of methane reaction. Ball milling was found to induce modification of the metal-support interface and Ni catalyst reducibility, thus leading to an increase in the CH4 and CO2 conversions. This study opens new possibilities to manipulate the CO2 activation for a portfolio of heterogeneous reactions.

Coupling Long-Range Facet Junction and Interfacial Heterojunction via Edge-Selective Deposition for High-Performance Z-Scheme Photocatalyst.

The construction of photocatalytic systems that have strong redox capability, effective charge separation, and large reactive surfaces is of great scientific and practical interest. Herein, an edge-connected 2D/2D Z-scheme system that combines the facet junction and the interfacial heterojunction to achieve effective long-range charge separation and large reactive surface exposure is designed and fabricated. The heterostructure is realized by the selective growth of 2D-layered MoS2 nanoflakes on the edge-sites of thin TiO2 nanosheets via an Au-promoted photodeposition method. Attributed to the synergetic coupling of the facet junction and the interfacial heterojunction that assures the effective charge separation, and the tremendous but physically separated reactive sites offered by layered MoS2 and highly-exposed (001) facets of TiO2 , respectively, the artificial Z-scheme exhibits excellent photocatalytic performance in photodegradation tests. Moreover, the junctional plasmonic Au nanoclusters not only act as electron traps to promote the edge-selective synthesis but also generate "hot electrons" to further boost photocatalytic performance. The Z-scheme charge-flow direction in the heterostructure and the roles of electrons and holes are comprehensively studied using in situ irradiated X-ray photoelectron spectroscopy and photodegradation tests. This work offers a new insight into designing high-performance Z-scheme photocatalytic systems.

Compact broadband ( O, E, S, C, L & U bands) silicon TE-pass polarizer based on ridge waveguide adiabatic S-bends.

A compact, ultra-broadband and high-performance silicon TE-pass polarizer is proposed and demonstrated experimentally. It is based on partially-etched (ridge) waveguide adiabatic S-bends, input/output tapers and side gratings on a silicon-on-insulator (SOI) platform. A compact footprint and weak back reflections are obtained due to the bent waveguide and the tapers, respectively. An extremely high extinction ratio is achieved by scattering the undesired light in the slab section using the side gratings. The 3D FDTD simulations show a TE loss less than 0.3 dB and an extinction ratio greater than 30 dB over a 500 nm wavelength range (1200 nm to 1700 nm). Measured results show a high TM loss (> 35 dB) and a low TE insertion loss (< 1.5 dB), over a 200 nm wavelength range (1450 nm to 1650 nm). The measured TE loss is < 0.6 dB at a communication wavelength of 1550 nm. The footprint of the optimized design is 65 µm × 20 µm.

Production of Size-Controlled Gold Nanoclusters for Vapor-Liquid-Solid Method.

This study demonstrated the deposition of size-controlled gold (Au) nanoclusters via direct-current magnetron sputtering and inert gas condensation techniques. The impact of different source parameters, namely, sputtering discharge power, inert gas flow rate, and aggregation length on Au nanoclusters' size and yield was investigated. Au nanoclusters' size and size uniformity were confirmed via transmission electron microscopy. In general, Au nanoclusters' average diameter increased by increasing all source parameters, producing monodispersed nanoclusters of an average size range of 1.7 ± 0.1 nm to 9.1 ± 0.1 nm. Among all source parameters, inert gas flow rate exhibited a strong impact on nanoclusters' average size, while sputtering discharge power showed great influence on Au nanoclusters' yield. Results suggest that Au nanoclusters nucleate via a three-body collision mechanism and grow through a two-body collision mechanism, wherein the nanocluster embryos grow in size due to atomic condensation. Ultimately, the usefulness of the produced Au nanoclusters as catalysts for a vapor-liquid-solid technique was put to test to synthesize the phase change material germanium telluride nanowires.

A user-friendly FIB lift-out technique to prepare plan-view TEM sample of 2D thin film materials.

Plan-view transmission electron microscopy (TEM) or electron diffraction imaging of a bulk or 2D material can provide detailed information about the structural or atomic arrangement in the material. A systematic and easily implementable approach to preparing site-specific plan-view TEM samples for 2D thin film materials using FIB is discussed that could be routinely used. The methodology has been successfully applied to prepare samples from 2D materials such as, MoS2 thin film, vertically oriented graphene film (VG), as well as heterostructure material SnTiS3. It is worth mentioning that in contrast to planar conventional graphene, VG grows vertically from the substrate and takes nanosheet arrays. Samples prepared using this methodology provide a simple, faster, and precise course in obtaining valuable structural information. The top-view imaging offers various information about the growth nature of the materials suggesting the efficiency of the sample preparation process.

Design Aspects of Doped CeO2 for Low-Temperature Catalytic CO Oxidation: Transient Kinetics and DFT Approach.

CO elimination through oxidation over highly active and cost-effective catalysts is a way forward for many processes of industrial and environmental importance. In this study, doped CeO2 with transition metals (TM = Cu, Co, Mn, Fe, Ni, Zr, and Zn) at a level of 20 at. % was tested for CO oxidation. The oxides were prepared using microwave-assisted sol-gel synthesis to improve catalyst's performance for the reaction of interest. The effect of heteroatoms on the physicochemical properties (structure, morphology, porosity, and reducibility) of the binary oxides M-Ce-O was meticulously investigated and correlated to their CO oxidation activity. It was found that the catalytic activity (per gram basis or TOF, s-1) follows the order Cu-Ce-O > Ce-Co-O > Ni-Ce-O > Mn-Ce-O > Fe-Ce-O > Ce-Zn-O > CeO2. Participation of mobile lattice oxygen species in the CO/O2 reaction does occur, the extent of which is heteroatom-dependent. For that, state-of-the-art transient isotopic 18O-labeled experiments involving 16O/18O exchange followed by step-gas CO/Ar or CO/O2/Ar switches were used to quantify the contribution of lattice oxygen to the reaction. SSITKA-DRIFTS studies probed the formation of carbonates while validating the Mars-van Krevelen (MvK) mechanism. Scanning transmission electron microscopy-high-angle annular dark field imaging coupled with energy-dispersive spectroscopy proved that the elemental composition of dopants in the individual nanoparticle of ceria is less than their composition at a larger scale, allowing the assessment of the doping efficacy. Despite the similar structural features of the catalysts, a clear difference in the Olattice mobility was also found as well as its participation (as expressed with the α descriptor) in the reaction, following the order αCu > αCo> αMn > αZn. Kinetic studies showed that it is rather the pre-exponential (entropic) factor and not the lowering of activation energy that justifies the order of activity of the solids. DFT calculations showed that the adsorption of CO on the Cu-doped CeO2 surface is more favorable (-16.63 eV), followed by Co, Mn, Zn (-14.46, -4.90, and -4.24 eV, respectively), and pure CeO2 (-0.63 eV). Also, copper compensates almost three times more charge (0.37e-) compared to Co and Mn, ca. 0.13e- and 0.10e-, respectively, corroborating for its tendency to be reduced. Surface analysis (X-ray photoelectron spectroscopy), apart from the oxidation state of the elements, revealed a heteroatom-ceria surface interaction (Oa species) of different extents and of different populations of Oa species.